Telemtry Control

This program controls a remote unit across a range. The OFF button sends a "FF" and expects an "FF" within 1/3 of a second otherwise it times out. The reason I uploaded this is because I could not find a serial program that worked using MSCOMM and ONCOM event. I did have trouble at first until I read that Microsoft has Rthreshold default as '0'-- it needs to be '1' for the received data event to be captured I realise this is a very simple program, but it WORKS. To check this out place a wire/short between pins 2 and 3 on your DB9 serial port. This will route TX to RX on the same port. I limited it to COM1 and Com2 but others can be added. I hope this helps someone trying to use the serial port.